Product types and profiles: cladding, panels, battens and mouldings

Our product types are grouped by use. Many products also work for other purposes, from finishing to landscaping, and you can use them to create and finish almost any surface. With different panels and product types, you can create a truly unique result.

Wood has been used for interior and exterior cladding for a very long time, and many wood terms and product names were coined long ago. Alongside its long history, renewable wood is a material for the new world. Because wood is organic, every wood product is unique. With our products, only your imagination sets the limits.

The profile codes below are the Finnish abbreviations used in our product names and price lists.

Cladding boards

UTH (log profile)

Cladding board / cladding panel, fully tongued and grooved, with a log-style decorative profile.

UTK Bead profile

Cladding board / cladding panel, fully tongued and grooved, with a bead decorative profile.

UTK Bevelled profile

Cladding board / cladding panel, fully tongued and grooved, with a bevelled decorative profile.

UTS

Cladding board / cladding panel, fully tongued and grooved, square-edged joint. Recommended for vertical cladding only.

UTV

Cladding board / cladding panel, fully tongued and grooved, chamfered joint.

UTW

Cladding board / cladding panel, fully tongued and grooved, angled chamfered joint, parallel on both sides.

UYL

Cladding board / cladding panel, single tongue and groove, overlapping profile (weatherboard).

UYS

Cladding board / cladding panel, single tongue and groove, square-edged joint. Recommended for vertical cladding only.

Boards and planks

KHP

Rough-planed board with rounded edges, same as HSP.

SH / Reveal moulding

Plank or board planed smooth on four sides. / Wide moulding, usually used to finish the reveals of doors and windows.

SHP

Plank or board planed smooth on four sides, with rounded edges.

Battens

SHP Batten

Batten planed smooth on four sides, with rounded edges.

Angled batten (Vinorima)

Decorative batten planed smooth on four sides.

Posts

SHP Post

Post planed smooth on four sides, with rounded edges.

Interior panels

STK Bead profile

Interior panel / interior board, fully tongued and grooved, with a bead decorative profile.

STK Karossi profile

Interior panel / interior board, fully tongued and grooved, with a Karossi decorative profile.

STK Batten profile

Interior panel / interior board, fully tongued and grooved, with a batten decorative profile.

STK Finger panel

Interior panel / interior board, fully tongued and grooved, with a finger decorative profile.

STP

Interior panel / interior board, fully tongued and grooved, rounded joint.

STP False joint

Interior panel / interior board, fully tongued and grooved, rounded joint, false joint.

STS4 / STS0

Interior panel / interior board, fully tongued and grooved, square-edged joint, open joint width 4 mm / 0 mm.

STS4 False joint / Double false joint

Interior panel / interior board, fully tongued and grooved, square-edged joint, open joint width 4 mm, false joint.

STV

Interior panel / interior board, fully tongued and grooved, chamfered joint.

STV Planed log profile

Interior panel / interior board, fully tongued and grooved, chamfered joint, with a planed-log decorative profile.

SYH

Interior panel / interior board, single tongue and groove, log profile.

Handrail

Handrail

Handrail timber planed smooth.

Frames

Frame 1V

Frame planed smooth, rebated on one side.

Frame 2V

Frame planed smooth, rebated on both sides.

Floorboards

HLL

Planed floorboard.

Finishing products and mouldings

Ceiling moulding (cornice)

Wooden moulding for finishing the joint between wall and ceiling.

Inside corner moulding

Wooden moulding for finishing the corners of panelled walls.

Cover strip (architrave)

For framing doors and windows or other finishing.

Traditional moulding

Wide decorative wooden moulding, ideal for restoration or for decorating a modern space.

Outside corner moulding

Wooden moulding for finishing and protecting outside corners.

SHA Bench front board

Sauna bench front board planed smooth on four sides, with a mounting groove.

Shadow gap moulding

Wooden moulding for finishing the joint between wall and ceiling.

Profile codes and abbreviations

Code	Meaning
1V	rebated on one side; the number after the code is the rebate width (mm).
2V	rebated on both sides; the number after the code is the rebate width (mm).
HLL	planed floorboard; the numbers after the code indicate the moisture content of the wood.
HSP	fine-sawn board with rounded edges, same as KHP.
KHP	rough-planed board with rounded edges, same as HSP.
P	(after a profile code) secret-nailing tongue, e.g. STS4P.
Perinnelista	traditional moulding, usually a wide decorative moulding.
PP	(in additional information) end-matched.
SH	plank or board planed smooth on four sides.
SHA	sauna bench front board planed smooth on four sides, with a mounting groove.
SHP	plank, board, batten or other wood product planed smooth on four sides, with rounded edges.
Smyygilista	reveal moulding: a wide moulding usually used to finish the reveals of doors and windows.
STK	interior panel / interior board, fully tongued and grooved, decorative profile; the name of the profile usually follows the code.
STP	interior panel / interior board, fully tongued and grooved, rounded joint, open joint width 10 mm.
STP5	interior panel / interior board, fully tongued and grooved, rounded joint, open joint width 5 mm.
STS	interior panel / interior board, fully tongued and grooved, square-edged joint, open joint width 10 mm.
STS0	interior panel / interior board, fully tongued and grooved, square-edged joint, open joint width 0 mm (flush joint).
STS4	interior panel / interior board, fully tongued and grooved, square-edged joint, open joint width 4 mm.
STV	interior panel / interior board, fully tongued and grooved, chamfered joint.
SYH	interior panel / interior board, single tongue and groove, log profile.
UTH	cladding board / cladding panel, fully tongued and grooved, log profile.
UTK	cladding board / cladding panel, fully tongued and grooved, decorative profile.
UTS	cladding board / cladding panel, fully tongued and grooved, square-edged joint – recommended for vertical cladding only.
UTV	cladding board / cladding panel, fully tongued and grooved, chamfered joint.
UTW	cladding board / cladding panel, fully tongued and grooved, angled chamfered joint, parallel on both sides.
UYL	cladding board / cladding panel, single tongue and groove, overlapping profile (weatherboard).
UYS	cladding board / cladding panel, single tongue and groove, square-edged joint – recommended for vertical cladding only.

Other terms

Term	Meaning
Bead panel (helmipaneeli)	decorative panel with a bead-like detail at the joint.
Face	the side of a wood product that remains visible.
Broad face	the wider side of a wood product.
Tongue and groove	an edge profile that joins pieces together: traditionally a square or slightly wedge-shaped groove in the middle of one edge and a matching tongue on the other.
False joint panel	decorative panel that looks like two or more narrower panels thanks to a false groove planed into the profile.
Edge	the narrower side of a wood product.
Back face	the wider side of a wood product that is not meant to be visible.
Relief grooves	lengthwise grooves on the back face that minimise movement caused by moisture.
False groove	a decorative groove planed into the face that looks like a joint.